Cheat Your Engine Control Unit to Free Up to 20% Horsepower
Each car has an engine control unit to the performance of the car. ECU engine control unit. The standard performance of a car is determined by the ECU by the manufacturer. manufacturer is not liable for the ECU program, the highest performance, so the car will use the get the best fuel.
For those who aim to understand as to race, that the more power you need, the more fuel you burn. Racer like me do not be concerned about the fuel consumption for theride.
To squeeze more horsepower out of the ECU, I have to cheat to the ECU, to push the engine to a higher explosion to get more power. This trick works only with fuel injection car, not the old car with a carburetor engine.
First you need to find the IAT sensor on the car. IAT stands for intake air temperature. The IAT sensor is the sensor that tells the air temperature signal to the ECU, the ECU in the amount of fuel to manage.Generally the IAT sensor is based on the intake tube or somewhere off the throttle before recording is varied.
Once you find the IAT, remove the adapter from the IAT sensor and you will see the plug with two holes on it. It looks like a normal sockets Label Plus (+) and minus (-) sign. Go to an electronic shop and get a resistance of 110 ohms and plug it into the port.
Before removing the plug securely, that your car engine is turned off and the keyPlug from the Check Engine light is first stop up on your dashboard. After the placement of the resistance on the IAT connector, remember, wrap up with a wire tape and make sure that the resistance is not loose and not to fall slightly. Next, cover up exposed to two holes on the IAT sensor wire band to feel safer.
For your reference, Engine Control Unit as an ECM, Engine Control Module known.
After everything done, time to test drive.
Related : gooddigg skypream Television
